사업자등록증
해외표준
FAQ
장바구니
고객센터
해외표준 상세정보
관심표준 등록 : 표준업데이트 시 알림서비스
제공형태 더보기-
표준
판매
ANSI/CSA/IGSHPA C448 SERIES-16 (R2021)
Design and installation of ground source heat pump systems for commercial and residential buildings- 발행일 : 2016-01-01
- 발행기관 : CSA
상세정보
| 분야 | |
|---|---|
| 적용범위 | Preface Note: In the designation for this Standard, and for all of its parts, "ANSI/CSA C448" has been changed to "ANSI/ CSA/IGSHPA C448". This change applies to all references throughout this Series.? This is the first edition of the binational ANSI/CSA/IGSHPA C448 Series, Design and installation of ground source heat pump systems for commercial and residential buildings. It supersedes the previous editions published in 2013 and 2002 under the title, Design and installation of earth energy systems.? The ANSI/CSA/IGSHPA C448 Series now consists of the following parts:? a) ANSI/CSA/IGSHPA C448.0, Design and installation of ground source heat pump systems %u2014 Generic applications for all systems;? b) ANSI/CSA/IGSHPA C448.1, Design and installation of ground source heat pump systems for commercial and institutional buildings;? c) ANSI/CSA/IGSHPA C448.2, Design and installation of ground source heat pump systems for residential and other small buildings;? d) ANSI/CSA/IGSHPA C448.3, Installation of vertical configured closed-loop ground source heat pump systems;? e) ANSI/CSA/IGSHPA C448.4, Installation of horizontal configured closed-loop ground source heat pump systems;? f) ANSI/CSA/IGSHPA C448.5, Installation of surface water (including submerged exchangers) heat pump systems;? g) ANSI/CSA/IGSHPA C448.6, Installation of open-loop systems ground water heat pump systems;? h) ANSI/CSA/IGSHPA C448.7, Installation of standing column well heat pump systems; and? i) ANSI/CSA/IGSHPA C448.8, Installation of direct expansion heat pump systems.? ANSI/CSA/IGSHPA C448.0 contains requirements applicable to any system within the scope of the ANSI/CSA/IGSHPA C448 Series. ANSI/CSA/IGSHPA C448.2 has alternative requirements for houses and small buildings. For systems within the scope of ANSI/CSA/IGSHPA C448.2, either ANSI/CSA/IGSHPA C448.1 or ANSI/CSA/IGSHPA C448.2 may be followed. Underground thermal energy storage systems formerly, contained within previous editions of this Standard under CSA C448.3, has been removed with UTS-specific information distributed among amended, distributed among, and included within ANSI/ CSA/IGSHPA C448.0 and ANSI/CSA/IGSHPA C448.1, where appropriate. This edition introduces requirements for standing column well systems.? CSA Group gratefully acknowledges the National Ground Water Association, Westerville, Ohio, USA for its permission to use material from ANSI/NGWA-01-14 (Water Well Construction Standard); and the International Ground Source Heat Pump Association, Stillwater, Oklahoma, USA for its permission to use material from the IGSHPA Closed-loop/geothermal heat pump systems design and installation standards (2013 edition).? --------------------------------------------------------------------------------------------------------- ? ANSI/CSA/IGSHPA C448.0-16 - Design and installation of ground source heat pump systems %u2014 Generic applications for all systems? Scope 1.1 This Standard applies to? a) direct expansion ground source heat pumps for systems using ground heat exchangers as a thermal source or sink for heating and/or cooling, with or without a supplementary heating source; and? b) unitary single package or split system liquid source and ground source heat pumps for all systems using groundwater, submerged heat exchangers, or ground heat exchangers as a thermal source or sink for heating and/or cooling, with or without a supplementary heating source.? 1.2 This Standard also applies to thermal energy storage systems.? 1.3 This Standard applies to new and retrofit installations.? 1.4 This Standard covers minimum requirements for equipment and material selection, site survey, system design, installation, testing and verification, documentation, and commissioning and decommissioning.? 1.5 This Standard applies to standing column well ground source heat pump systems.? 1.6 The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only.? 1.7 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard.? Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.? Notes to tables and figures are considered part of the table or figure and may be written as requirements.? Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.? ------------------------------------------------------------------------------------------------------------------ ANSI/CSA/IGSHPA C448.1-16 - Design and installation of ground source heat pump systems for commercial and institutional buildings Scope Clause 1 of ANSI/CSA C448.0 applies in this Standard.? ------------------------------------------------------------------------------------------------------------------------ ANSI/CSA/IGSHPA C448.2-16 - Design and installation of ground source heat pump systems for residential and other small buildings? Scope Clause 1 of ANSI/CSA C448.0 applies in this Standard.? ------------------------------------------------------------------------------------------------------------------------------ ANSI/CSA/IGSHPA C448.3-16 - Installation of vertical configured closed- loop ground source heat pump systems? Scope 1.1 This Standard applies to vertical closed-loop ground heat exchangers that are to be connected to a ground source heat pump system and used as a thermal source or sink for heating and cooling applications. Vertical closed-loop ground heat exchangers that are intended for connection to a direct expansion ground source heat pump are covered under ANSI/CSA C448.8.? 1.2 This Standard also applies to the vertical closed-loop ground heat exchanger portion of a thermal energy storage system.? 1.3 This Standard covers the minimum requirements for site survey, material selections, installation, testing and verification, documentation, commissioning, and decommissioning.? 1.4 The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only.? 1.5 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard.? Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.? Notes to tables and figures are considered part of the table or figure and may be written as requirements.? Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.? ----------------------------------------------------------------------------------------------------------------------------- ANSI/CSA/IGSHPA C448.4-16 - Installation of horizontal configured closed-loop ground source heat pump systems? Scope 1.1 This Standard applies to horizontal closed-loop ground heat exchangers that are to be connected to a ground source heat pump system and used as a thermal source or sink for heating and cooling applications.? 1.2 This Standard also applies to the horizontal closed-loop ground heat exchanger portion of a thermal energy storage system.? 1.3 This Standard covers the minimum requirements for site survey, material selections, installation, testing and verification, documentation, commissioning, and decommissioning.? 1.4 The values given in SI (metric) units are the standard. The values given in the parentheses are for information only.? 1.5 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard.? Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.? Notes to tables and figures are considered part of the table or figure and may be written as requirements.? Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.? -------------------------------------------------------------------------------------------------------------------------------------- ANSI/CSA/IGSHPA C448.5-16 - Installation of surface water (including submerged exchangers) heat pump systems? Scope 1.1 This Standard applies to submerged closed loop heat exchangers, which are to be connected to a ground source heat pump system and used as a thermal source or sink for heating and cooling applications.? 1.2 This Standard covers the minimum requirements for the site survey, material selections, installation, testing and verification, documentation, commissioning, and decommissioning.? 1.3 The values given in SI (metric) units are the standard. The values given in the parentheses are for information only.? 1.4 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard.? Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.? Notes to tables and figures are considered part of the table or figure and may be written as requirements.? Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.? ----------------------------------------------------------------------------------------------------------------------------------------------- ANSI/CSA/IGSHPA C448.6-16 - Installation of open ground water systems? Scope 1.1 This Standard applies to open-loop heat exchangers which are to be connected to a ground source heat pump system and used as a thermal source or sink for heating and cooling applications.? 1.2 This Standard covers the minimum requirements for site survey, material selections, installation, testing and verification, documentation, commissioning, and decommissioning.? 1.3 The values given in SI (metric) units are the standard. The values given in the parentheses are for information only.? 1.4 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard.? Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.? Notes to tables and figures are considered part of the table or figure and may be written as requirements.? Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.? ----------------------------------------------------------------------------------------------------------------------------------------------- ANSI/CSA/IGSHPA C448.7-16 - Installation of standing column well heat pump systems? Scope 1.1 This Standard applies to standing column well (SCW) heat exchangers which are to be connected to a ground source heat pump system and used as a thermal source or sink for heating and cooling applications.? 1.2 This Standard also applies to the standing column well heat exchanger portion of a thermal energy transfer system.? 1.3 This Standard covers the minimum requirements for site survey, material selections, installation, testing and verification, documentation, commissioning, and decommissioning.? 1.4 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard.? Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.? Notes to tables and figures are considered part of the table or figure and may be written as requirements.? Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.? -------------------------------------------------------------------------------------------------------------------------------------------- ANSI/CSA/IGSHPA C448.8-16 - Installation of direct expansion heat pump systems? Scope 1.1 This Standard applies to direct expansion ground source heat pumps for systems using ground heat exchangers as a thermal source or sink for heating and cooling, with or without a supplementary heating source.? 1.2 This Standard applies to new and retrofit installations.? 1.3 This Standard covers the minimum requirements for site surveys, material selections, installation, testing and verification, documentation, commissioning, and decommissioning.? 1.4 This Standard applies for commercial, institutional, and residential applications.? 1.5 The values given in SI (metric) units are the standard. The values given in the parentheses are for information only.? 1.6 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard.? Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.? Notes to tables and figures are considered part of the table or figure and may be written as requirements.? Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application. |
| 국제분류(ICS)코드 | |
| 페이지수 | 212 |
| Edition |
이력정보
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ANSI/CSA/IGSHPA C448 SERIES-16 (R2021)상세보기 | Design and installation of ground source heat pump systems for commercial and residential buildings | 2016-01-01 | 표준 |
관련상품
- 관련상품이 존재하지 않습니다.
다른 사람이 함께 구입한 상품
- Q636-93 (R2001) - Guidelines and Requirements for Reliability Analysis Methods .Published by CSA Group in 1993, Reaffirmed in 2001, 59 pages Withdrawn
- CSA C22.2 NO. 247:14 (R2019) - Operators and systems of doors, gates, draperies and louvres
- CSA C22.2 NO. 250.570:16 (R2020) - Track lighting
- Z800-18 (R2023) - Guideline on basement flood protection and risk reduction
- CSA C22.2 NO. 4:16 (R2020) - Enclosed and dead-front switches (Tri-national standard with NMX-J-162-ANCE-2016 and UL 98)
추천 상품
- IEC TS 63134:2020 - Active assisted living (AAL) use cases
- IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
- KS B ISO/TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs)
- KS B ISO/TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs)
- KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스
제공형태 닫기
PDF :
직접 파일 다운로드 및 인쇄(마이페이지 확인)보안PDF :
직접 파일 다운로드 및 인쇄(마이페이지 확인)* 단, 파일이동 및 복사 불가, 1회 다운로드 및 인쇄가능PRINT :
인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)BOOK :
인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)ZIP :
압축파일형태로 제공 (PDF, HTML, TXT, XLS 등으로 구성), 직접 파일 다운로드(마이페이지 확인)CD/DVD :
직접 파일 다운로드 및 인쇄(마이페이지 확인)DB :
별도 정보 제공HARDCOPY :
해외 배송 상품, 최대 3주 소요바인더 :
바인더 우편발송, 2~3일 소요온라인구독 :
WEB 접속 후 실시간 열람, 출력(1년간)PDF+PRINT :
직접 파일 다운로드 및 인쇄본 우편발송(2~3일 소요)보안PDF+PRINT :
직접 파일 다운로드 및 인쇄본 우편발송(2~3일 소요)* 단, 파일이동 및 복사 불가, 1회 다운로드 및 인쇄가능ASME PBVC Plus :
인쇄본 우편발송 및 온라인 구독(1User용, 2년)